Do you know why you chose the DELEM DA69T controller?

DA-69T Press Brake

Introduction

The DA69T Press Brake is a powerful and versatile tool for metal fabrication. It is designed to provide precision bending of sheet metal and other materials with high accuracy and repeatability. The machine can produce complex shapes and bends with various materials, including aluminum, steel, stainless steel, and copper. The DA-69T control is an excellent choice for any metal fabrication shop looking to increase its production capabilities and reduce costs.

This article will discuss the features and benefits of the DA-69T Press Brake and provide tips and tricks for getting the most out of the machine. We will also offer a FAQ section at the end of the article to answer any questions about the device.

Features and Benefits

DA-69T controller (Optional)The DA-69T offers 2D and 3D programming, including automatic bend sequence calculation and collision detection. Complete 3D machine setup with multiple tool stations giving proper feedback on the product feasibility and handling.

Highly effective control algorithms optimize the machine cycle and minimize setup time. This makes using press brakes more accessible, more efficient, and more versatile than ever. The OEM panel above the screen, reserved for machine functions and OEM application switches, is integrated into the design and can be used depending on the required application.

The DA-69T press brake has a powerful servo motor that provides smooth and precise operation. The machine also has a digital readout allowing an easy and accurate bending angle setting. The device also has a safety guard to protect the operator from hazards.

The design of the DA-69T press brake is easy to use and maintain. The machine has a user-friendly control panel allowing easy setup and operation. The device also features a self-diagnostic system to detect potential problems and alert the operator.
The design of the DA-69T press brake is energy-efficient and cost-effective. The machine has a high-efficiency motor that reduces energy consumption and operating costs. The device's design is also low maintenance, with minimal parts requiring regular maintenance.

The design of the DA-69T press brake is highly productive. The machine can produce complex shapes and bends with various materials, including aluminum, steel, stainless steel, and copper. The device can also make high-quality bends with high accuracy and repeatability.

Tips and Tricks

The DA-69T Press Brake is a powerful and versatile tool for metal fabrication. Following a few tips and tricks is essential to get the most out of the machine.

  1. Make sure to read the user manual before operating the machine. The user manual contains important information about the device, including safety instructions, setup instructions, and troubleshooting tips.
  2. Make sure to use the correct tooling for the job. The wrong tooling can cause damage to the machine or the material being bent.
  3. Make sure to use the correct settings for the job. The wrong settings can cause the machine to produce inaccurate bends or cause damage to the material being bent.
  4. Make sure to use the correct lubrication for the machine. Improper lubrication can cause damage to the device or the material being bent.
  5. Make sure to inspect the machine regularly. Regular inspections can help to identify any potential problems before they become serious.
  6. Make sure to clean the machine regularly. Regular cleaning can help to prevent any potential problems from occurring.
  7. Use the correct safety equipment when operating the machine. The faulty safety equipment can cause severe injury or death.

FAQ



What materials can the DA69T Press Brake bend?

The DA69T Press Brake can bend various materials, including aluminum, steel, stainless steel, and copper.



What is the maximum bending angle of the DA69T Press Brake?

The maximum bending angle of the DA69T Press Brake is 180 degrees.



What is the maximum thickness of material that the DA69T Press Brake can bend?

The maximum material thickness that the DA69T Press Brake can bend is 6mm.



What safety equipment should be used when operating the DA69T Press Brake?

Using the correct safety equipment when operating the DA69T Press Brake is essential. This includes safety glasses, gloves, and hearing protection.



How often should the DA69T Press Brake be inspected?

The DA69T Press Brake should be inspected regularly to ensure it is in good working condition. It is recommended to check the machine at least once a month.



How often should the DA69T Press Brake be cleaned?

The DA69T Press Brake should be cleaned regularly to ensure it is in good working condition. It is recommended to clean the machine at least once a month.

KRRASS: the best choice for
all sheet metal processing manufacturers

When considering the overall costs of purchasing, maintaining, and operating a sheet metal equipment setup, a sheet metal fabrication service: KRRASS brand is your best choice. KRRASS has a tremendous reputation in the market due to its focus on consistency and quality at the most competitive price. Whether it's press brake or any other application equipment, our team of experts has the right combination of industry knowledge and the latest tool to provide you with the best products and services on the market. Moreover, we set ourselves apart with our advanced system that is completely online. Just let us know what your product needs, request a quote, and start the process.
Make a request and Get Started Today

Get Instant Quote

Learn more about our products, please visit and subscribe to our Youtube channel

Recent Posts

Follow Us

Connect Us

Please enable JavaScript in your browser to complete this form.
=

Leave feedback about this

  • Rating
Choose Image

en_USEnglish