Call Us Today! +8618952087956 | info@krrass.com

Search
Close this search box.

CNC Press Brake operation skills are here

Philippines-NC-Press-Brake

According to the general hydraulic CNC Press Brake mold processing Q235 sheet is briefly introduced:

1. First, turn on the power, turn on the switch on the control panel, and start the oil pump so you can hear the sound of the pump.
2, must pay attention to adjust the stroke when using, must test before bending. It must be ensured that the upper die has a plate thickness gap when it is lowered to the bottom. Otherwise it will cause damage to the bending machine.
3, bending groove selection, generally choose 8 times wide groove plate thickness. For a sheet having a thickness of 4 mm, a gap of about 32 is required.
4, after the material adjustment, there are generally electric fast and manual fine-tuning points, the same as the shearing machine.
5. Press the foot switch to start bending. Release the foot and stop it, then press it to continue down. The plate bending plate is directly bent, no need to splicing, no need to slot, no welding rod, the appearance angle is beautiful, the manual welding is transformed into a fully automatic machine operation, the quality is improved, the labor efficiency is improved, the labor cost is reduced, and the bending machine is fast. The angle surface treatment is beautiful and the strength is high, which greatly shortens the product production cycle.
According to the general hydraulic CNC Press Brake mold processing Q235 sheet is briefly introduced:
1. First, turn on the power, turn on the switch on the control panel, and start the oil pump so you can hear the sound of the pump.
2, must pay attention to adjust the stroke when using, must test before bending. It must be ensured that the upper die has a plate thickness gap when it is lowered to the bottom. Otherwise it will cause damage to the bending machine.
3, bending groove selection, generally choose 8 times wide groove plate thickness. For a sheet having a thickness of 4 mm, a gap of about 32 is required.
4, after the material adjustment, there are generally electric fast and manual fine-tuning points, the same as the shearing machine.
5. Press the foot switch to start bending. Release the foot and stop it, then press it to continue down. The plate bending plate is directly bent, no need to splicing, no need to slot, no welding rod, the appearance angle is beautiful, the manual welding is transformed into a fully automatic machine operation, the quality is improved, the labor efficiency is improved, the labor cost is reduced, and the bending machine is fast. The angle surface treatment is beautiful and the strength is high, which greatly shortens the product production cycle.

Facebook
Twitter
LinkedIn
Pinterest

Everyone also look:

NEWSLETTER

Sign Up with your email address to receive news and updates.

Leave a Reply

Your email address will not be published. Required fields are marked *

Request A Quote

Fill in the form below and our team will be happy to assist you





    Surprise, 10% Free Now!

    Send an inquiry now and enjoy 10% off your purchase





      10% off on your first order

      Quote Now