Hydraulic Ironworker is an industrial machine with a combination of punching and cutting functions. It is an indispensable device for modern machinery manufacturing. This equipment also spawns hydraulic combined punching and shearing machines with more and more complex functions. Good use method can not only guarantee the quality of mechanical products, but also extend the service life of the machine. So what are the tips for using punching and Hydraulic Ironworker machine?
The first is the preparations before starting the machine. Before use, you need to refuel the parts. You can also properly refuel the punch, which can effectively reduce burrs. The other is to use it, the cut steel plate should be laid flat, and it should be kept neat and clean. When trial cutting, the length should not exceed 15mm. When the upper scissors move downwards, adjust the position of the lower steel plate and maintain a proper gap so that the cut steel plate will be relatively straight. In addition, the steel plate must be compacted when cutting to prevent the steel plate from jumping and hurting during the cutting process.
Learn more about our products, please visit and subscribe to our Youtube channel