Close this search box.

During the use of the Hydraulic Shearing Machine, strictly follow the operating procedures

guillotine Shears

Hydraulic Shearing Machine is a kind of equipment that can cut the metal sheet, automatically count, and send it to the next process by the feeding car according to the processing requirements. It is a kind of shearing equipment widely used in machining. It can cut steel plates of various thicknesses. It can be classified into three types: flat shear, rolling shear and vibration shear.

The fully automatic Hydraulic Shearing Machine is an automatic processing equipment that precisely controls the size of the sheet metal processing, performs automatic cycle shearing processing of large metal sheets, and transports them to the next step by a feeding cart. This equipment is used in the sheet metal shearing machine tool on the production line. It can cut the sheet metal according to the processing requirements, collect it by the feeder, and automatically load it to the production line.

Maintenance method of Hydraulic Shearing Machine:

Hydraulic Shearing Machine

  1. Operate strictly in accordance with the operating procedures.
  2. Add lubricating oil according to the requirements of the lubrication chart every time before starting the machine. The oil should be clean and free of precipitation.
  3. The machine tool needs to be kept clean frequently, and the unpainted part is anti-rust grease.
  4. The lubricating oil in the motor bearings should be replaced and refilled regularly, and the electrical parts should be regularly checked for normal, safe and reliable operation.
  5. Regularly check whether the V-belt, handles, knobs, buttons are damaged, and those with serious wear should be replaced in time, and the spare parts should be reported for supplement.
  6. Regularly check and repair switches, insurances, and handles to ensure reliable operation.
  7. Lubricate and scrub the machine tool 10 minutes before leaving get off work every day.
  8. It is strictly forbidden for non-designated personnel to operate the equipment, and it is usually necessary to leave the machine to stop.

Precautions for use of Machine:

  1. This equipment needs special person to be responsible and special person to operate. The operator should be familiar with the structure and performance of the machine.
  2. This equipment is used to cut metal plates with a thickness of 1-12mm and a width less than the width of the shearable plate. The cut sheet is based on mild steel with a tensile strength of 450N/mm2 and an elongation of 25%. If you need to cut the stainless steel plate, the cutting thickness is 1-6mm.
  3. Before starting the machine, check whether all parts of the machine are normal, and all sundries and tools should not be stacked on the workbench.
  4. The operator is not allowed to remove the protective fence, and must not put his hands deep between the upper and lower blades. The machine needs to stop when picking up and cutting the workpiece, and at the same time avoid the movable parts at the rear of the machine to injure people.

Learn more about our products, please visit and subscribe to our Youtube channel


Everyone also look:


Sign Up with your email address to receive news and updates.

Leave feedback about this

  • Rating
Choose Image

Request A Quote

Fill in the form below and our team will be happy to assist you


Surprise, 10% Free Now!

Send an inquiry now and enjoy 10% off your purchase


10% off on your first order

Quote Now