CNC Press Brake folded sheet metal bending has high productivity and high working accuracy, using different shapes of the upper and lower mould, can be bent into various shapes artifacts, stroke at a time can be to a bending forming of sheet metal, after a lot of bending can obtain more complex in the shape of the workpiece, when equipped with the corresponding equipment, Can also be used for punching.
Hydraulic bending machine can be folded in half bending of sheet metal has higher labor productivity and high working accuracy, using different shapes of the upper and lower mould, can be bent into various shapes artifacts, stroke at a time can be to a bending forming of sheet metal, after a lot of bending can obtain more complex in the shape of the workpiece, when equipped with the corresponding equipment, can also make a punching, All need to configure different molds, different molds will bend different workpiece.
CNC Press Brake Operating skills?
First, turn on the power supply, then turn on the switch, and then start the oil pump, this order can not be confused, by listening to the rotation of the oil pump to start the operation of the bending machine.
Second, the need to step on the foot switch for bending processing, there is something you can loosen the foot at any time, and then step on can continue to operate. It’s designed to be human.
Third, choose the bending notch to pay attention to the size of the plate thickness of eight times the width is appropriate.
Fourth, before operating the Press Brake, proper test should be carried out to see if there is a gap between the upper die and the bottom, and the gap size needs to be well controlled.
CNC Press Brake by torsion shaft, swing arm, joint bearing and other mechanical equipment with step organization, simple structure, stable and reliable characteristics, high precision with step. The mechanical equipment block is adjusted by the motor, and the NUMERICAL control machine tool controls the mark value.
The slide part of the guide adopts hydraulic transmission system, and the slide part of the guide is composed of the slide block, hydraulic cylinder and mechanical equipment block adjustment structure. The upper and lower hydraulic cylinders are fixed on the sound card frame, according to the hydraulic press so that the piston rod (rod) to promote the guide slide about fitness movement, mechanical equipment block by CNC machine control adjustment standard.
CNC Press Brake working table is composed of a base and a pressure plate, the base is connected with a clamping plate through a hinge, the base is composed of a shell, a coil and a cover plate, the coil is placed in the depression of the shell, the top of the depression is covered with a cover plate. When used, the wire is energized to the coil, and after energized, the pressure plate produces gravity, so as to achieve the clamping between the pressure plate and the base plate.
Learn more about our products, please visit and subscribe to our Youtube channel
