The Delem DAC 360s controller provides a user friendly and versatile solution for shearing machines. Upon demand multiple back gauge axes, cutting angle, stroke length and gap can be controlled, based on state of the art electronics. Next to back gauge control, the DAC-360s automatically calculates the required setting for the cutting angle and gap depending on material properties and thickness. The stroke length is optimized based on the required cutting length, increasing productivity. The back gauge control supports servo control, 2-speed AC control as well as inverter control. Depending on the application you can select either two side positioning or single side positioning with spindle correction.
The DAC-362s supports dual axis control, offering control for an extra back gauge or front gauge and related functionality.
Full force control for clamping and cutting is available in the DAC-360s.
With its tabular navigation on the bright LCD screen a clear and easy operation is offered. The numerical programming is user-friendly and guides the operator through all programming possibilities.
DAC-360s featuring
- Панельное жилье
- Яркий ЖК-экран
- Управление задним/передним прибором
- Функция возврата
- Контроль угла резки и зазора
- Ограничение длины хода
- Ручное перемещение всех осей
- Силовой контроль
- Измерение толщины листа
- RTS, Return to Sender function
- Second servo axis (DAC-362s)
- Sheet support
Конфигурация продукта
Стандарт
- 4.7” monochrome LCD
- Program memory for 100
programs
- Up to 25 steps per program
Информация для заказа
- DAC-360s, compact shear control
- DAC-362s, dual axes compact shear control
Технические характеристики
Общий
- Program library
- Millimetres / inches selection
- Power-down memorisation
- Machine hour counter
- Stroke counter
Ось
- Stroke control
- Gap control
- Angle control
- Back/front gauge control, dual gauge control (DAC-362s)
- Stroke 0 - 9,999.99 mm.
- Retract 0 - 9,999.99 mm.
- Correction -9.99 - 9.99 mm.
- Retract programmable
- Simultaneous axes movement
- Ручное перемещение осей
Силовой контроль
- Clamping force
- Cutting force
Housing
- Panel based, vertical housing
- Dimensions 189 x 257 x 44 mm
Функции программирования
- Numerical program setup
- Back gauge position
- Функция возврата
- Angle programming
- Gap programming
- Stroke length
- Step repetition
- Material types / properties
- Толщина
- Счетчик акций
- Sheet position
- Axis speed
- Sheet support
- “Return to sender” function
- Измерение толщины листа
- Back gauge park position
Computed functions
- Angle, gap and stroke length computation
- Force (clamping / cutting)
- Backgauge safety zone
Integrated functions
- Diagnostic mode
- Service mode
Чтобы узнать больше о наших продуктах, посетите наш сайт и подпишитесь на нашу рассылку. YouTube-канал
