The Delem DAC 360s controller provides a user friendly and versatile solution for shearing machines. Upon demand multiple back gauge axes, cutting angle, stroke length and gap can be controlled, based on state of the art electronics. Next to back gauge control, the DAC-360s automatically calculates the required setting for the cutting angle and gap depending on material properties and thickness. The stroke length is optimized based on the required cutting length, increasing productivity. The back gauge control supports servo control, 2-speed AC control as well as inverter control. Depending on the application you can select either two side positioning or single side positioning with spindle correction.
The DAC-362s supports dual axis control, offering control for an extra back gauge or front gauge and related functionality.
Full force control for clamping and cutting is available in the DAC-360s.
With its tabular navigation on the bright LCD screen a clear and easy operation is offered. The numerical programming is user-friendly and guides the operator through all programming possibilities.
DAC-360s featuring
- هيكل قائم على الألواح
- شاشة LCD ساطعة
- التحكم في العدادات الأمامية/الخلفية
- وظيفة التراجع
- التحكم في زاوية القطع والمسافة
- تحديد طول الشوط
- تحريك جميع المحاور يدوياً
- السيطرة على القوة
- قياس سمك الصفيحة
- RTS, Return to Sender function
- Second servo axis (DAC-362s)
- Sheet support
تكوين المنتج
معيار
- 4.7” monochrome LCD
- Program memory for 100
programs
- Up to 25 steps per program
معلومات الطلب
- DAC-360s, compact shear control
- DAC-362s, dual axes compact shear control
المواصفات الفنية
عام
- Program library
- Millimetres / inches selection
- Power-down memorisation
- Machine hour counter
- Stroke counter
محور
- Stroke control
- Gap control
- Angle control
- Back/front gauge control, dual gauge control (DAC-362s)
- Stroke 0 - 9,999.99 mm.
- Retract 0 - 9,999.99 mm.
- Correction -9.99 - 9.99 mm.
- Retract programmable
- Simultaneous axes movement
- تحريك المحاور يدوياً
السيطرة على القوة
- Clamping force
- Cutting force
Housing
- Panel based, vertical housing
- Dimensions 189 x 257 x 44 mm
وظائف البرمجة
- Numerical program setup
- Back gauge position
- وظيفة التراجع
- Angle programming
- Gap programming
- Stroke length
- Step repetition
- Material types / properties
- سماكة
- عداد المخزون
- Sheet position
- Axis speed
- Sheet support
- “Return to sender” function
- قياس سمك الصفيحة
- Back gauge park position
Computed functions
- Angle, gap and stroke length computation
- Force (clamping / cutting)
- Backgauge safety zone
Integrated functions
- Diagnostic mode
- Service mode
لمعرفة المزيد عن منتجاتنا، يرجى زيارة موقعنا الإلكتروني والاشتراك فيه. قناة يوتيوب
