High-precision press brakes are used to bend sheet metal and other materials to precise angles and shapes. They are typically used in manufacturing applications where high accuracy and repeatability are required, such as the automotive, aerospace, and medical industries.
In the previous two articles, we explained to you how to complete the installation of Delem DA58T and the tool configuration of Delem DA58T CNC press brake. When the above two preparations are completed, we can further understand and operate the Delem DA58T control system. In this article, we explain how to use the Delem DA-58T to perform a reference point check on a CNC press brake. The following are basic guidelines for performing this process:
Encienda cada interruptor de encendido de la máquina por turno
1. Turn on the main power supply of the power distribution cabinet: Antes de encender la máquina, cierre la puerta del armario de distribución de energía de la prensa plegadora hidráulica y gire la manija del armario eléctrico en sentido horario para bloquearlo. En este momento, también se activará la alimentación del armario eléctrico principal.
2. Encienda la fuente de alimentación de control: Inserte la llave de control de encendido y gírela hacia la derecha. En ese momento, se encenderá el control de encendido y se iluminará el indicador de control de encendido.
3. Compruebe todos los botones de parada de emergencia: Verifique los botones de parada de emergencia en el gabinete eléctrico, el controlador y el interruptor de pedal, y vuelva a colocarlos en estado abierto.
4. Ponga en marcha la bomba de aceite: Presione el botón de inicio de la bomba de aceite, la luz indicadora verde en el botón se enciende, en este momento la bomba de aceite principal de la prensa plegadora hidráulica se enciende y comienza a funcionar.
So far, the circuit system of the hydraulic press brake has been fully started, and the Delem DA-58T controller has also started to start and check the system. Wait for a while, the controller enters the system standby state. At this point, we need to check the reference point of the prensa plegadora CNC.
Realizar una verificación del punto de referencia
Paso 1: In the Delem DA-58T controller, click the manual button at the bottom to switch to the manual operation page. At this time, you can see that the parameters corresponding to the X-axis and Y-axis are blank values;
Paso 2: Click the start button in the up right corner of the screen, the hydraulic press brake will automatically start the inspection program, and start to check the related operations of the X-axis and R-axis;
Paso 3: After the X-axis and R-axis inspection procedures are completed, lightly step on the foot switch to press the slider down to check the reference point of the Y-axis. After the slider reaches the lowest point, it will automatically return to the top, and the Y-axis is completed at this time;
Paso 4: After all the reference point checks are completed, the reference values of the Y-axis and X-axis will be displayed on the screen. So far, the reference point check of the press brake has been completed.
The above is the specific operation of how to perform a reference point check on the Prensa plegadora CNC, Espero que te sea útil. Si has completado las operaciones anteriores, puedes continuar leyendo nuestro siguiente artículo:
English
Portuguese
Spanish